Publicidad
Idiomas disponibles
Idiomas disponibles
2. Connect the upper handle frame + middle handle frame
to the lower handle frame by the other 2 sets of handle
knobs + bolts, as shown (Fig. 9).
Fig. 9
Lower
handle frame
NOTE: Make sure that the handle knobs are placed inside
the handle frame. Otherwise they will affect the wheel
adjustment system.
3. Clip on the cable clips to secure the cable.
Operation
Intended Use
The 24V-X2-TLR14-CT cordless tiller + cultivator is designed
for small gardens and flower beds, this cordless tiller +
cultivator effectively loosens and turns over new soil. It may
also be used to mix coarse soil with fertilizer, peat, and
compost. This product may not be used to till extremely dry or
wet soil.
The use of this product in rain or wet conditions is prohibited.
For safety reasons, it is essential to read the entire instruction
manual before first use and to observe all the instructions
contained within this manual.
This product is intended for private domestic use only. It is not
intended for any commercial trade use. It must not be used for
any purposes other than those described.
Wheel Adjustment
m
WARNING!
Always switch the product off and remove
the batteries before making any adjustments.
1. The wheels can be adjusted to 3 different positions for
better cultivating results (Fig. 10).
Handle knob
+ bolt
2. To adjust the wheel position, push the wheel adjustment
Starting the Machine
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless tiller + cultivator you will
need two batteries and one charger from the 24V iON+
System. See page 16 for battery and charger options and
specifications, or for more information visit sunjoe.com.
m
The blades will continue to turn for a few seconds after the
tool has been switched OFF. Do not touch the rotating blades.
Contact with hot components (i.e. motor housing, gear box,
etc.) on the machine may cause burns. Allow the machine to
cool before handling.
11
Fig. 10
Transport
Work
position
position 01
knob while moving it to the slot for desired position; let go
of the knob and make sure it locks into position (Fig. 11).
Fig. 11
Wheel
adjustment knob
TOOL ONLY
WARNING!
Rotating blades may cause serious injury.
Work
position 02
Work
position 02
Work
position 01
Transport
position
Publicidad
