Charger Operation - SNOWJOE SUNJOE 24V-X2-TLR14-CT Manual Del Operador

Ocultar thumbs

Contenido

Idiomas disponibles

Unpacking

Carton Contents

• Cordless tiller + cultivator with lower handle frame

• Middle handle frame

• Left upper handle

• Right upper handle

• Upper Handle frame

• Handle knobs + bolts (4 sets)

• Cable clips (2)

• Manual with registration card

NOTE: In order to operate this cordless tiller + cultivator you

will need 24V iON+ System batteries and chargers. See page 16

for battery options and specifications, or visit sunjoe.com.

1. Carefully remove the cordless tiller + cultivator and check

to see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new cordless

tiller + cultivator. The packaging is made of recyclable

materials. Properly dispose of these materials in

accordance with local regulations.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils

or small parts. These items can be swallowed and pose a

suffocation risk!

Battery Pack Operation

The equipment is powered by two lithium-ion batteries. The

battery packs are completely sealed and maintenance free.

TOOL ONLY

BATTERY + CHARGER SOLD SEPARATELY

In order to operate this cordless tiller + cultivator you will

need two batteries and one charger from the 24V iON+

System. See page 16 for battery and charger options and

specifications, or for more information visit sunjoe.com.

WARNING!

The cordless tiller + cultivator can only be

provide sufficient power to the tool. Make sure to use two

batteries of the same voltage and the same capacity. Using the

tool with batteries of different capacity will cause damage to

the batteries.

customer service center at

Battery Charge Level Indicator

The battery packs are equipped with a push button for

checking the charge level. Simply press the push button to

read off the battery charge level from the LEDs of the battery

indicator:

• All 3 level monitoring LEDs are lit: Battery charge level

is high.

• 2 level monitoring LEDs are lit: Battery charge level is

decreasing. Stop work as soon as possible.

• 1 level monitoring LED is lit: Battery is flat. Stop work

IMMEDIATELY and charge the battery. Otherwise the

battery's service life will be greatly shortened.

Lights

Light Indicators

Charge level button

The battery is at 30% capacity

and requires charging

The battery is at 60% capacity

and requires charging soon

The battery is at full capacity

NOTE: If the charge level button does not appear to be

working, connect the battery to the charger and charge

as needed.

NOTE: Immediately after using the battery pack, the charge

level button may display a lower charge than it will if checked

a few minutes later. The battery cells "recover" some of their

charge after resting.