Description of features
Start button
•
Press and hold the
The LED indicator and light effects will light up accordingly.
•
Press and hold the
•
When you turn the microphone on or off, you'll hear a short piece of music.
Echo control
•
Briefly press the Echo button
•
Briefly press the Echo button
USB charging and LED indicator
•
The microphone checks the battery voltage on startup. If it's less than or equal to 3.7V,
a low voltage alarm will be emitted from the speaker and you need to recharge it. Use a
USB type-C cable (provided) to connect the mic to the USB charging port and charge it.
You can use a USB A-compatible AC adapter like the one in your smartphone. It is not
possible to operate the electric toy while charging.
•
The LED indicator turns red when charging and turns off when the microphone is fully
charged.
Bluetooth pairing
•
The LED will flash blue while searching for Bluetooth and stays solid blue when connected.
You'll also hear a short sound when you connect or disconnect Bluetooth.
•
When you pair your mobile device, look for the name MICVF.
Recording function
•
Press and hold the Record/Play button for about 2 seconds to record or stop recording.
•
Short-press the Record/Play button to play the recording.
•
Microphone light effects turn solid red when recording and solid green when playing.
•
Note that you can record up to 1 minute.
Volume adjustment
•
Short-press the volume button
•
Long-press the volume button
•
Volume increase level: 20%→40%→60%→80%→100%
•
Short-press the volume button
•
Long-press the volume button
•
Volume level reduction: 20%→40%→60%→80%→100%
NB: The microphone is set by default to level 4 (80%)
button for about 3 seconds to turn on the microphone and lights.
button for about 3 seconds to turn it off.
to increase the reverb by one level: off, 1, 2, 3 (4 levels);
to lower the reverb by one level: 3, 2, 1, off (4 levels);
to increase the volume from level to level.
to quickly increase the volume.
to reduce the volume from level to level.
to quickly lower the volume.
- EN 17 -