Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7340B
  6. Instrucciones de instalación

Metra 95-7340B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 95-7340B
KIA Sorento 2011-2013
KIT FEATURES
• Double DIN radio ISO mount provision
• Painted matte black to match factory
KIT COMPONENTS
• A) Radio housing • B) ISO brackets
A
METRA. The World's best kits.
APPLICATIONS
95-7340B
B
™
1-800-221-0932
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-7303 - with out UVO
• 70-7304 - with UVO
Antenna Adapter:
• 40-KI11 - Kia antenna adapter 2007-up
TOOLS REQUIRED
• Cutting tool • Phillips screwdriver • Socket set
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION

Publicidad

loading

Manuales relacionados para Metra 95-7340B

Resumen de contenidos para Metra 95-7340B

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-7340B APPLICATIONS KIA Sorento 2011-2013 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: 95-7340B • 70-7303 - with out UVO • 70-7304 - with UVO KIT FEATURES Antenna Adapter: • Double DIN radio ISO mount provision • 40-KI11 - Kia antenna adapter 2007-up • Painted matte black to match factory TOOLS REQUIRED • Cutting tool • Phillips screwdriver • Socket set KIT COMPONENTS • A) Radio housing • B) ISO brackets...
  • Página 2 99-7058 Table of Contents Kia Sorento 2011-2013 Dash Disassembly 1. Remove shifter knob. (Figure A) 2. Remove the shifter surround panel. (Figure B) – Kia Sorento 2011-2013 ..........2-3 3. Remove panel under the heater and air climate Kit Assembly controls. (Figure C) – Double DIN radio ISO mount provision ......3 Continue on next page (Figure B) (Figure A) (Figure C)
  • Página 3 Dash Disassembly 95-7340B Kit Assembly 95-7340B Kia Sorento 2011-2013 Double DIN radio ISO mount provision 4. Remove (2) Phillips screws from 1. Attach the double DIN brackets to the double DIN trim plate. bottom and remove center fascia (Figure A) panel. (Figure D) 2. Slide the radio into the bracket/ 5. Remove (4) Phillips screws radio housing assembly from securing the heater and air climate the rear and secure the radio to controls. (Figure E) the assembly using the screws 6. Remove (4) Phillips screws supplied with the radio. (Figure B) securing the radio. (Figure F) 3. Locate the factory wiring Continue to kit assembly harness and antenna plug in the dash. Metra recommends using...
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-7340B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Componentes Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7340B APLICACIONES KIA Sorento 2011-2013 CABLEAdO Y CONEXIONES dE ANtENA (se venden por separado) Arnés de cableado: 95-7340B • 70-7303 - con fuera UVO arnés • 70-7304 - con UVO arnés CArACtErÍStICAS dEL KIt Adaptador de antena: •...
  • Página 6 99-7058 Indice Kia Sorento 2011-2013 Desmontaje del tablero 1. Retire la palanca de cambios. (Figura A) 2. Retire el panel envolvente shifter. (Figura B) – Kia Sorento 2011-2013 ..........2-3 3. Retire el panel debajo del calentador y Ensamble del kit controles de temperatura del aire.

  • Página 7: Provisión De Radio De Montaje Iso Double Din

    Desmontaje del tablero 95-7340B Ensamble del kit 95-7340B Kia Sorento 2011-2013 Provisión de radio de montaje ISO double DIN 4. Retire (2) tornillos Phillips de la parte inferior y quitar salpicadero 1. Adjuntar los soportes de central. (Figura D) doble DIN a la placa de montaje de doble DIN.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7340B EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...