Maintenance And Troubleshooting; Maintenance Schedule; Maintenance Procedures; Troubleshooting - Ortotecsa G.18951 Serie Manual De Usuario

Baños de remolinos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To remove smudges and fingerprints:
Wipe surfaces with a quality Stainless Steel Cleaner / Polish. Apply using a soft non-abrasive cloth.
Always follow cleaner/polish product directions provided.
To remove dirt and debris
Wash surfaces with a mild liquid soap. Apply using a soft, non-abrasive cloth. Rinse surfaces thoroughly
with clean water. Afterwards, using a soft non-abrasive cloth, wipe surfaces with stainless steel
cleaner/polish.
Special Note: After cleaning for serious problems, let dry, and expose to air for at least 24 hours to allow
"healing" (restoring of the chromium oxide layer) of the stainless steel surface.

12. Maintenance and troubleshooting

WARNING: DO NOT MODIFY THIS PRODUCT WITHOUT MANUFACTURER PERMISSION

12.1. Maintenance Schedule

The whirlpool requires regular maintenance. Set up and follow a maintenance schedule. The table
represents minimum intervals for maintenance.
MINIMUN
MAINTENANCE
INTERVALS
DISINFECTING
CLEANING
INSPECTING
When using maintenance products, follow the manufacturers' directions and read the manufacturer's
MSDS, Material Safety Data Sheets.

12.2. Maintenance procedures

Motor
Motors are equipped with sealed greased ball bearings that do not require lubrication. Vent holes in the
motor and motor cover shell must be cleaned periodically to allow free air flow and prevent
overheating.
Hard Water
The mineral properties of hard water, if allowed to build up over a period of time, have the potential for
creating damage to the moving parts of the turbine assembly. We recommend the installation of a
water softener or if that is not possible, the use of a water softening agent.

12.3. Troubleshooting

When there is a significant loss in pressure at the turbine assembly
Check water inlet holes underneath the pump, clean away any foreign material.
Add water, pump body must be completely submerged.
Motor does not start when switch is turned on
Check your power source.
EACH
AS
EACH
USE
NEEDED
WEEK
X
X
X
X
EACH
MONTH
X
39

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

G.18951/aG.18951/a-1G.18951/bG.18951/cG.18951/dG.18951/e

Tabla de contenido