Publicidad
Enlaces rápidos
Kit Contents: K1, K2
K1
K2
Fig. 1
New
Ref.
Description
K1
A
Splash Guard
K2
B
Self-Drilling Screw (1x)
NI
Not included - Reference Only
Tools Needed:
■ 1/4 inch Nut Driver
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only.
ATTENTION
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Remove Part
1. If
A
is vertical (Fig. 2) pull
ering the Temperture Monitor Control (TMC). Discard
2. If
A
is angled (Fig. 3) remove
ering the TMC. Discard
A
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
1210, 2118 - Splash Guard
Fig. 2 - 1210
Fig. 3 - 1210
A
to unsnap and remove from cov-
A
B
(1x) and remove
A
from cov-
.
Questions 1-800-543-1219
A
K1
K2
B
A
K1
Replace Part
Using new part:
NOTICE
1. Align
over the TMC; then press
K1
(Fig. 2).
2. If the cooling system does not allow
the TMC, put the protruding stud of the TMC into the existing
hole in the rear of the refrigerator (or use
hole) and turn the TMC and
3. Put
K2
through the mounting hole in
rear of the refrigerator.
.
640555
Service Kit
Fig. 2 - 2118
Fig. 3 - 2118
When installing
K1
on the TMC, make
sure no wires are pinched under
to snap onto the TMC
K1
to align vertically over
K1
K2
to drill a new
at an angle (Fig. 3).
K1
K1
and fasten to the
Part No. 640554B (06.03.2020)
.
K1
Publicidad
Manuales relacionados para Norcold 1210
Resumen de contenidos para Norcold 1210
- Página 1 P.O. Box 1285 640555 Service Kit Ann Arbor, MI 48106 www.norcold.com 1210, 2118 - Splash Guard Kit Contents: K1, K2 Fig. 2 - 1210 Fig. 2 - 2118 Fig. 1 Fig. 3 - 1210 Fig. 3 - 2118 Replace Part Ref.
- Página 2 640555 Juego de servicio Ann Arbor, MI 48106 www.norcold.com 1210, 2118 - Coque anti-éclaboussures 1210, 2118 - Protector contra salpicaduras Contenido del juego K1, K2 Contenu de l’ensemble : K1, K2 Consulte la Fig. 1. Consultez la Fig. 1. Nouvelle pièce Réf.