SANUS VuePoint F107d Manual De Instrucciones página 13

3. Remove the wall plate template
CAUTION:
Be sure the anchors
4. Install wall plate assembly
pulled firmly against the wall plate.
NOTE:
If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt
the wall plate until level. Tighten the bottom lag bolt
CAUTION:
Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate
next step.
3
18
and insert two anchors
14
are seated flush with the concrete surface.
18
using two lag bolts
16
15
16
. Ensure the wall plate is securely fastened to the wall before continuing on to the
15
.
18
and two washers . Tighten the lag bolts
17
when adjustments are complete.
4
17
16
16
only until they are
16
16
15
17
16
and shifting
13