Kit Contents: K1
OLD STYLE
A
NOR001019A
Tools Needed:
■ 6 Inch Needle Nose Pliers
■ 1/4" Nut Driver
■ Anti Static Wrist Strap
■ Masking Tape
■ Refrigerator Service Manual
New
Ref.
Description
K1
A/A1
DC Board Assy / Screws (2x)
NI
Not Included: Reference Only
This procedure is to be performed by
WARNING
!
authorized service personnel only.
ATTENTION
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Be sure the appliance has been isolated
from the electrical supply before starting!
Refer to Service Manual for details.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
N7 & N8 Series - DC Board
A1
A
P1
A1
Fig. 1
Questions 1-800-543-1219
NEW STYLE
A
K1
NOR000691A
Replace Part - Old Style
Refer to Fig. 1.
1. Turn refrigerator off.
2. Remove
A1
(1x) from the bottom of
3. Flip up the lower part of
A
4. To aid correct reassembly, use pieces of masking tape to label
each wire with the terminal of
5. Disconnect each of the wires and the cable connector from
6. Remove
A1
(2x) from
A
; remove
7. Using new parts, reverse Steps 6 through 1 to replace and
reinstall.
Replace Part - New Style
Refer to Fig. 2.
1. Turn refrigerator off.
2. To aid correct reassembly, use pieces of masking tape to label
each wire with the terminal of
3. Disconnect each of the wires and the cable connector from
4. Remove
A1
(2x) from
A
; remove
5. Using new parts, reverse Steps 4 through 1 to replace and
reinstall.
639577
Service Kit
A1
A
K1
A1
Fig. 2
A
.
.
to which it is attached.
A
A
.
to which it is attached.
A
A
.
Part No. 639576B (12.10.2019)
A
.
A
.