How to assemble
the ZAAZ high chair
Check that you have all the parts for this product before assembling it.
The assembly should be performed only by adults.
Assemble Seat onto Leg Frame
Once the seat is attached to the legs of the ZAAZ high chair, it is consid-
ered to be a permanent assembly. However, it is possible to reverse this
assembly if the seat needs to be put into storage or shipped. We recom-
mend this should not be a regular occurrence.
1 Place the leg frame on the floor facing you, as illustrated.
2 From the back of the seat, release the lock by first pulling down on the
latch and then rotating the flap completely forward.
3 Position the seat over the leg frame to line up the slots behind the seat
flap with the white tracks on the leg frame, as illustrated.
4 Once the seat is correctly positioned over the white tracks, keep the flap
up and firmly push the seat downward until you hear a click. If the flap is
not completely up you will not be able to push the seat down.
5 To lock the seat in the desired position, lower the flap and listen for the
click as the seat locks back into position. Continue to push firmly on the
sitting surface until the seat reaches its lowest position.
The seat is now permanently mounted to the legs and can be adjusted
within the range between the highest and lowest positions.
All manuals and user guides at all-guides.com
( 1 )
( 2 )
( 3 )
11