Power On/Off; Video Recording - Wiseup DVR-0031-1 Manual Del Usuario

All manuals and user guides at all-guides.com
2. Operation
>> Please make sure the camera is fully charged before using.
>> Please make sure the Micro SD Card is properly fitted into the Micro SD Card
Slot on your camera. The camera will not work without a Micro SD card.
>> Please make sure the Battery is securely fitted into the Battery Holder on the
remote controller.
>> Please make sure the Power On/Off Switch on the camera has been slid to
the "ON" side.
>> Please make sure the remote controller is pointed to the camera every time
you press the buttons.
>> Please make sure the insulating film is removed from the remote controller.
>> Camera is fully charged when both red and blue indicator lights are solid on.

1) POWER ON/OFF

(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Power off the camera by pressing the Power On/Off Button for 2 seconds.
The Red Indicator Light will go out.
(3) In standby mode, the camera will shut down automatically within 2 minutes if
no operation is done.

2) VIDEO RECORDING

(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Press the Video Record Button once to record video. The Red Indicator Light
will flash 3 times and then go out.