Power Connection; Ipod Connection; Line-In Connection; Wireless Connection - Digital Signature Mint 220 Guia Del Usuario

SETUP

POWER CONNECTION

1. Insert round shape connector of AC adaptor to marked
"DC-in" port.
2. Insert the small connector of power cord into AC adaptor.
3. Plug the power cord into a wall outlet.

IPOD CONNECTION

1. Before plugging iPod, locate the appropriate iPod adaptor
insert shipped with your iPod purchase.
2. If you cannot find the proper adaptor, visit www.mintds.
com to find and purchase the right one.
3. Insert the adaptor into the dock.
4. Plug iPod into the dock with the adaptor.
5. Mint 220 automatically detects when an iPod is plugged
and changes input mode to iPod.
6. You are ready to listen to the music from iPod.

LINE-IN CONNECTION

Line-In port provides connectivity with broad ranges of music
and gaming devices that are equipped with mini 1/8 in (3.5
mm) audio line-out or RCA type stereo out (Figure: Mini Jack
and RCA connector).
1. Select the correct cable for the device that you want to
connect.
• Portable devices such as MP3 players, CD players,
games and small TVs are likely to accept mini stereo
connector.
• Lager devices such as TVs, gaming consoles and
setup boxes commonly use RCA type connectors.
• Mini jack to mini jack or RCA to mini jack cables
are not included. This cable could be purchased at
electronic retail stores or please visit www.mintds.com
to purchase online.
2. Plug the mini stereo connector into Line-in port on the
back of the Mint 220.
3. Plug the other side of connector into the device that you
want to connect.
• For RCA connector, plug the two connectors into
RCA ports: white connector for white port and red
connector to red port
• For mini stereo connector, plug the mini connector
into 1/8 in headphone port (Figure: RCA stereo out to
Line-in connection).
4. Select Line-In by pushing "Input Button" on the left side
of the iPod dock until Line-In mode indicator is lit, or
simply push the Line-In button on the remote control.
5. You are ready to listen to the music from the Line-In
connection.
06 ENGLISH
All manuals and user guides at all-guides.com
1 3
2
iPod mode indicator
mini stereo cable RCA-type cable
mini jack out to Line-In
RCA stereo out to Line-In
Line-In mode indicator
SETUP

WIRELESS CONNECTION

FOR PC CONNECTION
1. Plug Mint USB Audio Transmitter into USB port and
wait until "New Hardware Found" message appears
on lower right corner of your PC screen. It will take
about 30 seconds.
2. PC automatically selects the Mint Wireless USB
Audio as the default audio device. It is recommended
that you verify this automatic audio setting.
• Open Sound and Audio Devices in control panel
• Click Audio tab, and verify that Mint Wireless USB
Audio is selected as the default audio device.
3. Select Wireless Audio by pushing the Input Button
on the left side of the iPod dock until Wireless mode
indicator is lit, or simply push the Wireless Audio
button on the remote control.
4. You are ready to enjoy any audio from your PC
wirelessly through Mint 220 Wireless Digital Music
Station.
FOR MAC CONNECTION
1. Plug the Mint USB Audio Transmitter into USB port.
2. Open Sound folder in System Preference. Under
Output tab, select Mint Wireless USB Audio as your
sound output.
3. Select Wireless Audio by pushing the Input button on
the left side of the iPod dock until Wireless mode
indicator is lit, or simply push the Wireless Audio
button on the remote control.
4. You are ready to enjoy any audio from your Mac
wirelessly through Mint 220 Wireless Digital Music
Station.
When you reconnect Mint wireless USB Audio
Transmitter to your computer, it is recommended that
you follow this procedure.
Sound and Audio Devices
Wireless mode indicator
Sound Preferences
ENGLISH 07