Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL POWER TOOL SAFETY WARNINGS
A
WARNING
Read all safety warnings and all instructions.
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The tenn "power tool" in the warnings
operated (corded) power tool or battery-operated {cordless )
power tool.
WORK AREA SAFETY
work
• Keep
area clean and well lit.
areas invite accidents.
• Do not oparate power too l s in explosive atmospheres,
such
in 1he presence
as
Power
tools create sparks which may ignite the
or duet.
dust or fumes.
• Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match 1he
the plug In anyway. Do not use any adapter plugs with
earthed (g.,unded) power too l s.
matching outlets will reduce risk
with
• Avoid body contact
such as pipes, radiators, ranges and refrigerators.
There is an increased risk
earthed or grounded.
• Do not expose power too l s to rain or
Water entering a power tool will increase the
shock.
• Do not abuse 1he cord. Never use
pulling or unplugging the power tool. Keep cord away
from haat, oil, sharp edges or moving parts.
or entangled cords inc
rease
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
cord suitable for outdoor use reduces the risk
shock.
• If operating a power tool In a damp location Is
unavoidable, use a ground fault circuit Interrupter
(GFCI) protected supply.
of electric shock.
• Usa battery only with charger listed.
18V nickel-cadmium and 18V lithium-ion battery packs,
see tool/appliance/battery pack/charger correlation
suppl
emen
t 987000.. 4 32.
PERSONAL SAFETY
• Stay alert, watch what you are doing and
sense when operating a power tool. Do not usa a
power
tool
while you are tired or under 1ha Influence
of
drugs, alcohol or medication.
while operating power tools may result in serious personal
injury.
All manuals and user guides at all-guides.com
Failure to
refers
to your mains
Cluttered or dark
of
flammable liquids, gases
outlet.
Never modify
Unmodified plugs and
of
electric shock.
earthed or grounded surfaces
of
electric shock if your body is
wet
conditions.
risk of
electric
the
cord
for
carrying,
Damaged
the risk
of
electric shock.
Use of a
of
electric
of
Use
a
GFCI reduces the risk
For use with
use
common
moment
of
inattention
A
• Usa personal protective equipment. Always wear eye
Protective equipment such as dust mask,
protection.
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
• Prevent unintentional starting. Ensure the switch
1he off-position before connecting to power source
and/or battery pack, picking up or carrying the too l .
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning
1he power tool on.
a rotating part of the power tool may result in personal
injury.
• Do not overreach. Kee p proper footi n g and balance
This enables better control
at all11mes.
in unexpected situations.
• Dress pmperty. Do not wear
Kee p your hair, clo1hlng and gloves away from moving
Loose
parts.
clothes, jewellery or long hair can
in moving parts.
• If devices are provided for the connection
extraction and collection facilities, ensure tha9e are
connected
and property used.
can reduce dust-related hazards.
• Do not wear loosa clo1hing or jewelry. Contain long
hair.
Loose clothes, jewelry, or long hair can be drawn
into air vents.
• Do not use on a ladder, or unstable support.
footing on a solid surface enables better control
power tool in unexpected situations.
POWER TOOL USE AND CARE
• Do not force
the
tool for your application.
do the job better and safer at the rate for which it
designed.
• Do not use the power too
Any power tool that cannot be controlled
it on and off .
with the switch is dangerous and must be repaired.
• Disconnect the plug from tha power source and/or
1he batte ry pack f.,m
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Store Idle power tools out of the reach
do
not allow persons unfamiliar wl1h 1ha power tool
or these Instructions to operata 1he power too l .
too l s are dangerous in the hands
• Maintain power tools. Check for misalignment or
of
binding
moving parts, breakage
other condition that may affect the power tool's
H
operation.
damaged, have the power tool repaired
Many accidents are caused by poorly
before use.
maintained power tools.
3 - English
wrench or a key left att a ched to
A
of
the power tool
loose
clothing or Jewellery.
of
Use
dust collection
power tool. Use 1ha corTeCt: power
The correct power tool will
l
if
the switch does not turn
the
power tool before making
of
children and
of
untrained users.
of
parts and any
Is
In
be
caught
of
dust
Stable
of
the
was
Power
Publicidad
Tabla de contenido
