Handle Assembly - Mr.Bricolage MBE1339P2 Manual De Instrucciones

6. ASSEMBLY

6.1 HANDLE ASSEMBLY

Move the upper part of the handle (1) already pre-assembled, in the work position and block
it in place using the handles (2).
The washers (3) on the handles (2 ) must be mounted so they keep the top part (1) firmly fixed
to the two lower sections of the handle (4 and 5), without too much effort required to tight-
en or release them.
Loosen the knobs (6) to ad just the height of the handle, when the desired height has been
reached, firmly tighten the knobs (6) again.
Fix the electrical cable in place using the clamps ( 7 if foreseen), so that the height of the
handle can be regulated without excessively tightening the cable.
The correct position of the electric cable hook (8) is as shown.
6
EN
All manuals and user guides at all-guides.com
8
1
1
6
2 7
4
8
6
8
2
5
3
2