8. GRASS CUTTING
1
8.2 STARTING
Connect the extension cable correctly as indicat-
ed according to the different types of clips.
Start the engine by pressing the safety push-but-
ton (2) and pulling the switchgear lever (1).
8.3 ADVICE FOR CORRECT CUTTING
8.4 END OF JOB
When you have finishing mowing, release the
lever (1).
FIRST disconnect the cable extension from
the supply socket (2) and THEN from the side
of the lawnmower's switchgear (3).
WAIT FOR THE BLADE TO STOP before car-
rying out any type of work on the machine.
All manuals and user guides at all-guides.com
8.1 FITTING THE GRASS-CATCHER
Lift the stone-guard and attach the grass-catcher (1) cor-
rectly as shown in the drawing.
While cutting, ensure that the electric cable is
always behind you and on the area of grass
1
already cut.
2
The lawn will look better if it is always cut to the
same height and in alternate directions.
IMPORTANT NOTE - Should the motor stop dur-
ing use through overheating, wait about 5 min-
utes before re-starting.
1
2
3
1
2
9 EN