Velleman HAA9523S Manual Del Usuario página 8

Control de acceso digital independiente
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

H) User code entry mode (auto or manual) – Installer programming
Locations Code of functions
NOTE: In single user mode, no matter the selection (auto or manual mode), the master code and the user
code MUST be set as a 4-digit number.
I) Pacifier tones (keypad acknowledgement tones) – Installer programming
Locations Code of functions
J) Allowable time to start door propped-up alarm – Installer programming
Locations Code of functions
K) Exit programming mode
Validation Comments
Exit programming mode and return to normal operation
7. Single User or Multi-User Mode Selection
The HAA9523S has been factory-set in single user mode with
Single user mode (command code: 8900)
Each output can only be operated by one user code. The user code must be 4 digits long. There are 10 000
possible code combinations. The code can be programmed directly into the user code locations 1, 2 and 3
respectively for the 3 outputs. Refer to "6. C) 1. Single user – Digits may be repeated" for more details. This
mode is always set with auto code entry in default. You do not need to press
4-digit user code.
NOTE: The system can be set for manual code entry with programming option 0 at location 82 if necessary.
Multi-user mode (command code: 8901)
Up to 100 individual codes will operate output 1 and 10 individual codes will operate output 2 and 3. The user
code can be 4 to 8 digits long. There are over 100 million possible code combinations. The user codes can be set
for auto or manual entry with programming options at location 82. Default mode is manual entry mode. Pressing
HAA9523S
Validation
Validation
Validation
0
1 to 999
Comments
Auto entry code is selected.
code is NOT required in code entry. The user code
MUST be set in the same digit length as the master
code in auto entry mode and the code length can be 4
to 8 digits long.
Manual entry mode is selected.
user code is required in code entry. The user codes
can be 4 to 8 digits long and they are not required to
be the same length as the master code.
Comments
Pacifier tones available on the keypad
All pacifier tones are off.
Comments
No propped-up alarm
Allowable time from 1 to 999 seconds before door
propped-up alarm starts
as master code.
8
key following the user
key following the
in user code entry. Only enter the
VELLEMAN

Publicidad

Tabla de contenido
loading

Tabla de contenido