Accu-Chek Performa Nano Instrucciones De Uso página 49

(for example)
9. Press and release to set the control level in
the meter. OK and the control result alternate on
the display if the result is in range. Err and the
control result alternate on the display if the
control result is not in range.
NOTE
• The ranges for the Level 1 and Level 2 control solutions are printed on the test strip container label.
When the control result is inside the range on the test strip container, the test strips and meter are
working properly.
• After a successful test, the meter turns off 5 seconds after the test strip is removed.
OR
(for example)
10. Remove and discard the used test strip.
47