Tripp-Lite B140-002 Manual Del Propietário página 8

Daisy-Chain Installation
1. Make sure the DVI source is powered-OFF.
2. Connect the DVI source to the DVI port on the B140-004 labeled INPUT
using a Tripp Lite P561-Series DVI-D Single-Link Cable.
3. Connect the external power supply to the B140-004 local unit and plug it
into a Tripp Lite Surge Suppressor, PDU or Uninterruptible Power Supply
(UPS). The green RJ45 LEDs and red Power LED will illuminate to
indicate power is being received from the external power supply.
4. Using the included DVI daisy-chain cable, connect the OUTPUT DVI port
on the first B140-004 to the INPUT DVI port on a second B140-004.
5. Connect the external power supply to the B140-004 local unit and plug it
into a Tripp Lite Surge Suppressor, PDU or Uninterruptible Power Supply
(UPS). The green RJ45 LEDs and red Power LED will illuminate to
indicate power is being received from the external power supply.
6. Repeat steps 4 and 5 if you are connecting a third B140-004.
7. Optional: Connect a DVI monitor to the OUTPUT DVI port on the last
B140-004 using a Tripp Lite P561-Series DVI-D Single-Link Cable.
8. Using Cat5e/6 cable, connect one of the RJ45 output ports on a local
unit to the RJ45 input port on a B140-1P0 or B140-1A0 remote unit; or,
connect it to the 110 punchdown jack on a B140-1P0-WP or
B140-1A0-WP remote wallplate.
9. Repeat step 5 for each additional remote unit you are connecting.
10. B140-1A0 and B140-1A0-WP Only: Connect the external power supply
to the B140-1A0 or B140-1A0-WP, and plug it into a Tripp Lite Surge
Suppressor, PDU or Uninterruptible Power Supply (UPS). The green
RJ45 LEDs on the B140-1A0 and the green LED on the B140-1A0-WP
illuminate to indicate that the unit is receiving power.
11. Repeat step 10 for each additional B140-1A0 or B140-1A0-WP in the
installation.
12. Connect the B140-1P0 DVI-D Single-Link Connector to the monitor; or,
connect the B140-1P0-WP, B140-1A0 or B140-1A0-WP to the monitor
using a Tripp Lite P561-Series DVI-D Single-Link Cable. The green
RJ45 LED on the B140-1P0, and the green LED on the B140-1P0-WP,
illuminate to indicate the unit is receiving power from the monitor.
201007212 93-2986.indb 8
All manuals and user guides at all-guides.com
(B140-004 only) continued
8
9/1/2010 3:48:13 PM