Powering On And Off; For Windows - Zagg Universal Manual Del Usuario

POWERING ON AND OFF

The Universal comes ready to go with about 80% of the battery charged.
To turn it on, simply slide the power button to the ON position, you'll
see a green dot. A blue LED light will flash on the CAPS LOCK key and a
green LED will flash on the fn key. To turn your Universal off, simply switch
the power button to the OFF position, you'll see a red dot.
PAIRING YOUR UNIVERSAL
Each time you switch devices, especially one with different operating systems,
you'll need to pair your Universal. To pair it, make sure it is turned on and then find
your operating system below and follow the directions.
FOR ANDROID
1. Select SETTINGS > WIRELESS & NETWORKS > BLUETOOTH > ON
2. Press the Pair button on your Universal keyboard. A blue LED light will flash
until your device and the Universal are paired.
3. Your device should find the Universal and then list it as an available device. If it
doesn't, simply touch Search for devices and it will scan again.
4. When the Universal shows in your list of available devices, touch it to complete
pairing.
FOR IOS
1. On your device select: SETTINGS > GENERAL > BLUETOOTH > ON.
2. Press the Pair button on your Universal keyboard. A blue LED light will flash
until your device and the Universal are paired.
3. Your device will display "ZAGGkeys Universal" as an available device. Select this
option to complete pairing.

FOR WINDOWS

1. Press the Pair button on your Universal keyboard. A blue LED light will flash until
your device and the Universal are paired.
2. If you have it, touch the Bluetooth symbol in your system tray* and select Add a
Device. If you don't have the Bluetooth symbol available, simply touch the Start
button and then choose Devices. From this menu you can choose Add a Device.
3. The Universal should show up as an available device; select it and touch Next to
complete pairing.
*Windows 8 users can use the Settings charm.
POWER BUTTON
PAIR BUTTON
3