LAVOR Pro Reno Manual Del Usuario página 14

Introduction
Introduction
Please read this instruction manual
thoroughly, referring to it whenever
necessary before starting a job. This is
because, as with all appliances, the high-
pressure cleaner must be used correctly in
order to ensure optimum performance.
First of all, open both fold-out pages
containing the illustrations, and study
then carefully until you are familiarised
with how the machine works. These pages
fold out in front of and behind the cover of
the instruction manual.
Intended use
The high-pressure cleaner is ideal for all
outdoor cleaning requirements. It may be
used to clean dirty surfaces such as house
walls, verandas and roads.
A range of optional gun-mounted
accessories is available for foam and rotary
EN
brush washing applications.
The appliance may also be used to clean
walls, swimming pools, garden furniture
14
and tools, and to wash vehicles.
Always observe all applicable local
legislation concerning cleaning products.
The machine must never be used for any
purposes other than those specified or
modified, as this may be extremely
dangerous. The manufacturer cannot be
held responsible for damages or injury
resulting from inappropriate use or
modifications.
Do not direct the nozzle toward
mechanical parts containing lubricant
grease, as the grease will dissolve and
spread over the surrounding ground.
Vehicle tyres/tyre valves may only be
cleaned from a minimum distance of
30 cm, otherwise the vehicle tyre/tyre
valve could be damaged by the high-
pressure jet. The first indication of this is a
discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be deadly
dangerous.
(Photo A)
Standard equipment
1 Lance
2 Gun with pressure gauge
3 High pressure hose
4 Detergent tank
5 Electric cable
6 ON / OFF switch
7 Water outlet
8 Water inlet + filter
9 Hose reel
10 Handle for hose reel
11 Hook for power lead
12 Handle
13 Nozzle cleaning pin
14 Accessory holder
15
Nozzles
16
Nozzle holder
T Tank cap
Technical specifications
Rated voltage
Power rating
Max. delivery
Operating pressure
Minimum intake pressure 0.1 MPa (1 bar)
Maximum intake pressure 1 MPa (10 bar)
Jet recoil on spray gun
Minimum intake rate
Max. intake water
temperature
Storage temperature
Weight
Acoustic pressure
Protection rating
Vibration transmitted
to operator
230V ~ 50 Hz
2400 W
15 l/min
(900 l/time)
13 MPa (+/-10%)
(130 bar)
20 N
20 l/min
40° C
away from frost
not below 0°C
22 kg
L 95db (A)
WA
L 76db (A)
PA
IPX5
0.56 m/s
2