AVS Ventshade Deflector Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Lower window. Use a putty knife to grasp and pull down the rubber window channel. Clean the inside of the window
rubber window channel
1
Installation Instructions
Ventshade
Front Passenger
Side Visor
Rear Passenger's
Front Passenger
Side Visor
Clean Towel Phillips Screwdriver
NOTE: Actual application may vary slightly from illustrations.
channel with an alcohol pad.
Without Post
Deflector
®
TapeTabs x10
Rear Driver's
Visor
Tape Tabs x18
Visor
Putty Knife
rubber window channel
Page 1 of 3
I - Sheet Number VS04 Rev.A
Alcohol Pad x2
Alcohol Pad x4 Screws x2
Punch Drill
With Post