Caster Installation; Carton Contents - Craftsman 3000 Serie Manual Del Operador

HarDWare
tooLs reQuireD:
3/8-in Wrench
1/2-in Wrench
Cross-tip Screwdriver
HarDWare iNcLuDeD:
caBiNet HarDWare
#14 - 10 x 5/8-in hex Screws
(Qty: 16)
#14 - 10 x 3/4 Cross-tip Screw
(Qty: 4)
cHest HarDWare
5/16 - 18 Ball Stud (Qty: 4)
5/16 - 18 Clip-on Nut (Qty: 4)

cartoN coNteNts

cabinet:
Literature
Caster pack
handle pack
All manuals and user guides at all-guides.com
chest:
hardware Bag Assembly
Cover Label
Literature
Note: Not all assembly instructions will relate to your model.
siDe HaNDLe attacHmeNt
items Needed:
#14 - 10 x 3/4 Cross-tip Screw (Qty: 4)
Cross-tip Screwdriver
process:
• Attach the side handle using (4) #14 - 10 x 3/4 Cross-tip
screws.
• hand tighten. Do not overtighten.

caster iNstaLLatioN

items Needed:
#14 - 10 x 5/8-in hex Screws (Qty: 16)
3/8-in Wrench
process:
Note: use adequate personnel for this operation.
Note: failure to install caster angles may result in
premature cabinet failure.
• Place the unit on its top. Use packaging material to
protect the paint finish.
• Position caster angles on the cabinet. Flanges should be
toward the inside and pointed up.
• Attach casters and caster angles using (4) #14 - 10 x 5/8
hex Screws for each caster. Mount both swivel casters
on the same side of the cabinet as the side handle.
• Wrench tighten all screws. Do not overtighten.
• Return the unit to its upright position.
Caster angles
(flanges inside)
2
assemBLy