General Information; Product Description; Before Use - Pro-Lift T-5350 Manual De Funcionamiento De Piezas & De Instrucciones

GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this
lift. The owner and operator of this equipment shall have an understanding of this lift and safe operating procedures
before attempting to use. The owner and operator shall be aware that use and repair of this product may require
special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language
before use of this lift is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service
immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
lift that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service im-
mediately. If the lift has been or suspected to have been subjected to a shock load (a load dropped suddenly, unex-
pectedly upon it), immediately discontinue use until lift has been checked by a factory authorized service center. It is
recommended that an annual inspection be done by qualified personnel. Labels and Owner's Manuals are available
from manufacturer (see Replacement Parts, page 5).

PRODUCT DESCRIPTION

The Pro-Lift Lawn Mower Lift is specifically designed to lift and support up to rated capacity loads consisting of a
single Riding Lawn Mower whose frame is compatible with the lifting members of the lift. This lift is NOT suitable
for lifting, leveling and/or positioning cars, trucks, SUV's or conveyances other than those specifically listed and ap-
proved above. This lift is NOT suitable for lifting, leveling and/or positioning houses, construction trailers or dwellings
in general. This product is designed to be permanently assembled. The Hydraulic unit is not to be used independ-
ently of the lift.

BEFORE USE

Inspect lift before each use:
1. Before using this product, read the owner's manual
completely and familiarize yourself thoroughly with
the product and the hazards associated with its
improper use.
2. Ensure that rollers and lift arms move freely. Check
for and tighten any loose assemblies. Do not use if
cracked, broken, bent or otherwise damaged parts
are noted or if the lift is suspected to have been
subjected to a shock load. A shock load is caused
by rapidly opening and closing the release valve
while the lift is loaded. Such operation may result
in a hydraulic overload which may damage the hy-
draulic unit.
3. Verify that the product and the application are com-
patible. Incompatibility is evident when the loaded
mower wobbles, feels unstable, and/or does not
set securely in the lift's wheel baskets. Tying down
incompatible loads will not make the loads secure
and may cause unexpected loss of load resulting in
personal injury and/or property damage.
4. Owner and operators of this device shall be aware
that no serviceable or replaceable parts are available
for this device other than those parts listed on page
5. Any lift that appears to be damaged in any way, is
worn or operated abnormally shall be removed from
service immediately until such time as repairs can
be made. Do not attempt to weld, rivet or otherwise
repair this device.
5. DO NOT modify or alter this device. It is recom-
mended that an annual inspection be done to this
device by qualified persons and that missing or dam-
aged labels, warning/safety decals be replaced with
factory authorized labeling.
WARNING
!
• Study, understand and follow all instructions
before operating this device.
• Use of this product is limited to lifting, holding and
lowering loads consisting of a single mower
compatible with the lift platform. Incompatibility is
evident when the loaded mower wobbles, appears
unstable, and/or does not securely engage the
wheel baskets.
• Restraining an incompatible load will not make the
load secure and may cause unexpected loss of
load.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Center load on lift platform.
• Immediately after lifting load, ensure lift mechani-
cal load holding device is engaged.
• Never work on, under or around a load that is not
stable or secure.
• Keep operator's and bystander's head, hands and
feet away from lift arms when raising and lowering.
• No alterations shall be made to this product.
• Only attachments, restraints or adapters supplied
by the manufacturer shall be used.
• Failure to heed these messages may result in
personal injury and/or property damage.
2