Soundcore Liberty Neo 2 Manual Del Usuario página 8

2. Press and hold the button on both earbuds for 8 seconds until the earbud LED
indicators flash red for 3 times.
3. Take the earbuds out of the charging case and wait until the LED indicator on
one of the earbuds flashes fast while the other breathes slowly. This confirms
that the reset was successful and your earbuds can be connected normally.
Specifications
• Specifications are subject to change without notice.
Input
Rated output power
Battery capacity
Charging time
Playtime
(varies by volume level and content)
Driver size
Frequency response
Impedance
Waterproof level
Bluetooth version
Bluetooth range
5V 0.7A
5 mW (@1% THD)
85 mAh x 2 (earbuds)
770 mAh (charging case)
2 hours
Up to 10 hours
(Total 40 hours with the charging case)
8 mm x 2
20 Hz - 20 kHz
16 Ω
IPX7
V 5.2
10 m / 33 ft
6