Bluetooth Pairing - Soundcore Liberty Neo 2 Manual Del Usuario

Bluetooth Pairing

1. Take the earbuds out of the charging case, the earbuds will automatically
enter the Bluetooth pairing mode.
• The LED indicator on earbuds will flash white.
2. Select "Soundcore Liberty Neo 2" on your device's Bluetooth list to connect.
When successfully connected, the LED indicator on earbuds will turn off.
• To manually enter the pairing mode, take either earbud out of the charging case,
turn it off, and then press and hold the multi-function button for 3 seconds until
entering the pairing mode, and then take the other one from the case.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds
only by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of battery
and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
3