Rydeen CM-180SW2 Manual De Instrucciones

Recommended for
Default mode.
reversing backwards.
2
Recommended when Recommended only
Mode:CM-180SW2
approachinga wall or a when reversing in
big standing obstacle. crowded surroundings
CM-180SW2
MAX:100mA
CMOS,1/3
1280(H)x720(V)
Color video out : 1.0Vp-p75(ohm)
600TV Lines
0.2 Lux
Yes(IP68)
-20°C to +65°C
1.High Quality COS lmage Sensor for High Resolution & Night Time Visibility
2.Mirror/Standard lmage Selectable
3.Parking Line ON/OFF Selectable
4.Different Display Modes Selectable
5.Water Resistant with IP68 Standard
Button Use Instructions
1.Parking Line ON/OFF
When the camera is on, press and hold the button for 3 seconds, the parking line will be ON
or OFF(the screen will show the words "parking line off" or "parking line on" ).
2. Mirror/ Standard Image Selectable
When the camera is off, press and hold the button, meanwhile put the power on. When the
"REAR VIEW" shows up, then release the button, it is REAR VIEW mode; If you need front view,
keep on pressing the button for 3 seconds more until there is "FRONT VIEW" on the screen.
3. Display Modes Hide and Recovery
When the camera is on, switch to the unwanted mode and press and hold the button for
6 seconds, the current mode is hidden. The setting is saved automatically for next time use.
When the camera is power off, press the button and hold, meanwhile, put the power on. Release
the button when " REAR VIEW " shows on the screen. All the modes in rear view will be recovered.
If need to recover the hidden modes in front view, please keep on pressing the button for 3 seconds
more when " FRONT VIEW" shows on the screen.
Recommended only when
reversing towards a passage
or there's suspicious obstacle
at the corner.
Recommended for
reversing straight
trigger wire
backwards towards a wall
Recommended for
Default mode.
reversing backwards.
2
Mode:CM-180SW2
Recommended when Recommended only
approachinga wall or a when reversing in
big standing obstacle. crowded surroundings
CM-180SW2
MAX:100mA
CMOS,1/3
1280(H)x720(V)
600 Lignes TV
0.2 Lux
Non
2
1.Capteur d'lmage CMOS de haute qualité pour haute résolution et vision nocturne
2.Sélection d'lmage Miroir / Standard
3.Ligne de stationnement ON / OFF sélectionnable
4.Différents modes d'affichage sélectionnable
5.Résistant à l'eau avec norme IP68
Instructions d'utilisation du bouton
1. Ligne de stationnement ON / OFF
Lorsque l'appareil photo est allumé, maintenez le bouton enfoncé pendant 3 secondes, la
ligne de stationnement sera activée ou OFF (l'écran affichera les mots "ligne de
stationnement" ou "ligne de stationnement activée").
2. Miroir / image standard sélectionnable
Lorsque l'appareil photo est éteint, appuyez sur le bouton et maintenez-le enfoncé pendant
ce temps. Quand le "REAR VIEW" apparaît, puis relâchez le bouton, c'est le mode
Recommended only when
reversing towards a passage
or there's suspicious obstacle
at the corner.
Recommended for
reversing straight
backwards towards a wall