Bluetooth Operation - Tokai TSB-507K Manual De Instrucciones

ABOUT PAIRING: Pairing is the term used when two Bluetooth devices are connected wirelessly for the
first time. This allows the devices to see each other and sets up a one to one communication channel
between both devices.
This unit can receive audio signal from a BLUETOOTH audio source device.
1. Power on the unit. Switch to BLUETOOTH mode by pressing the SOURCE button on the main unit or the
MODE button on the remote repeatedly, "BLUETOOTH" will be sounded.
2. "BT" flashes on the LED display while Bluetooth is pairing.
3. Enable the Bluetooth function of the Bluetooth audio source device.
4. Pair and connect to TOKAI TSB-507K (the unit) on the audio source device. If prompted for pass code,
enter "0000".
5. When pairing is successful, "BT" turns to show steadily and "CONNECTED" will be sounded. Operate your
Bluetooth source device to start to play music through the sound bar.
6. During playback, press the
cease or resume the playback.
7. During playback, press TUNE
the previous track.
Press and hold TUNE
rewind the current track.
8. When the Bluetooth source device is moved out of the receiving range of the Bluetooth sound bar, the
Bluetooth connection will be disconnected. Moving again into the receiving range will resume connection
and restart playback through the sound bar automatically. If the playback does not start automatically,
please operate manually.
9. During Bluetooth playback, if the audio source is a mobile phone and it receives a call, the playback will
pause and the unit will read the telephone number to you. The normal playback will resumed after you
answered the call.
Note: The above steps for BLUETOOTH connection and playback are intended for reference purpose
only. Please refer to the instruction manual of the Bluetooth audio source device for more details.
DISCONNECTION/RECONNECTION TO THE BLUETOOTH AUDIO SOURCE
Press the STANDBY button to turn off the unit, and to disconnect the Bluetooth device.
Turn the unit on and switch to Bluetooth mode to automatically retrieve the last paired Bluetooth device.
Note: Simultaneous connection of two external Bluetooth audio devices to the unit is not supported. Press
and hold the /BT button on the unit or the PAIR/
connection, or operate your Bluetooth audio source device to disconnect, the unit will launch a search to
find the second Bluetooth peripheral, operate as above steps to build a new Bluetooth connection.
All manuals and user guides at all-guides.com

BLUETOOTH OPERATION

/BT button on the sound bar or the PAIR/
button to skip to the next track; press TUNE
button to fast forward the current track; press and hold TUNE
22
button on the remote to
button twice to skip to
button on the remote to disconnect current
button to fast