Sanitize Prior to First Use:
Before you use your Rumble Tuff
disassemble and boil all parts of the Expression Collection Combo Kit in water
for 10 minutes.
• Be sure to use enough water to keep all parts afloat while boiling.
• Do NOT boil Tubing or Tubing Adapter.
• Remove all parts from the water immediately after sterilizing. To avoid
scalds and burns, do NOT touch the product with bare hands right after
sterilizing.
• Completely air-dry or towel-dry the parts before reassembling.
Wet components may affect the performance of your Electric Breast Pump.
Please ensure that all parts are completely dry before use.
Before Each Use:
• Wash your hands thoroughly with soap and warm water before handling
the Expression Collection Combo Kit, the Electric Breast Pump, or any
Expression Collection parts or attachments.
• Make sure all parts are clean and dry.
• Ensure the Tubing is free from any liquid. Do NOT operate your Rumble
®
Tuff
Electric Breast Pump if any liquid is visible in the Tubing.
General Cleaning Instructions:
Caution: Please use extra caution when
cleaning the Membrane Valve. If it gets
damaged, your breast pump will not
function properly.
Special Cleaning Instruction for the
Membrane Valve:
The Membrane is specially
designed with a node on the stem
for your convenience while
cleaning.
To clean the Membrane Valve,
simply pull the Membrane from the
Valve until it snaps slightly on the
stem but does not completely detach from it. Clean the Membrane
Valve in warm, soapy water, then rinse thoroughly in clean, warm water
or warm running water. After cleaning, push the stem back into place
and make sure the Membrane lays flat against the Valve opening.
Cleaning Instructions
®
Electric Breast Pump for the first time,
13