Publicidad
Idiomas disponibles
Idiomas disponibles
ANTI-TIP DEVICE INSTALLATION INSTRUCTIONS
STEP 3 - Range Installation
A. A free-standing range may be installed by one person.
B. Align the range to its designated location and slide it
back into position. Note: A minimum clearance of 1/4²
(6 mm) is required between the range and the leveling
foot that will engage the ANTI-TIP bracket, see figure
4.
CAUTION: Damage to the range may occur if range is
moved or lifted by grasping the main top or backguard.
C. All freestanding ranges with a glass top have a non
lift-up top. Coil tops are lift-up.
All manuals and user guides at all-guides.com
D. For SAFETY CONSIDERATIONS as well as optimum
E. To check the range for proper installation of the anti-tip
F. Proceed with the remainder of the installation
NOTE: USE A MINIMUM OF (2) SCREWS TO
FIGURE 4
-4-
performance adjust the range so that it is level. This
may be checked by placing a spirit level or a large pan
of water on the cooktop or the oven rack. If an
adjustment is required pull the range forward, tip the
range and rotate the leveling feet as required.
bracket: Use a flashlight and look underneath the
bottom of the range to see that one of the rear leveling
feet is engaged in the bracket slot.
instructions provided with the range.
INSTALL ANTI-TIP BRACKET TO THE
WALL OR FLOOR.
Publicidad
