Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
91471873
REV.0 18/02/13
Safety Message to Installers of Warning Light Equipment
People's lives depend on your proper installation and servicing of our products. It is important to read,
understand, and follow all instructions shipped with this product. In addition, listed below are some other
important safety instructions and precautions you should follow:
•
To properly install this light, you must have a good understanding of automotive electrical procedures and
systems along with profi ciency in the installation and use of safety warning equipment.
•
DO NOT install equipment or route wiring in the deployment path of an airbag.
•
When drilling into a vehicle structure, be sure that both sides of the surface are clear of anything that could
be damaged.
•
To be an effective warning device, an emergency warning system produces bright light that can be
hazardous to your eyesight when viewed at a close range. Do not stare directly into the lights at a close
range or permanent damage to your eyesight may occur.
•
Do not handle cables, the power supply, or led lamp or remove the dome while the equipment is
connected. After disconnecting power to the unit, wait fi ve minutes before handling any parts of the led
system.
•
In order for the light to function properly, a separate ground connection must be made. If practical, it
should be connected to the negative battery terminal. At a minimum, it may be attached to a solid metal
body or chassis part that will provide an effective ground path as long as the light system is to be used.
•
Locate the light control so the VEHICLE and CONTROL can be operated safely under all driving
conditions.
•
If a vehicle seat is temporarily removed, verify with the vehicle manufacturer if the seat needs to be
recalibrated for proper airbag deployment.
•
Do not attempt to activate or deactivate the light control while driving in a hazardous situation.
•
You should frequently inspect the light to ensure that it is operating properly and that it is securely
attached to the vehicle.
•
File these instructions in a safe place and refer to them when maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death.
Unpacking the Warning Light
After unpacking the light, inspect it for damage that may have occurred in transit. If it has been damaged, fi le a
claim immediately with the carrier, stating the extent of damage. Carefully check all envelopes, shipping labels,
and tags before removing or destroying them.
Installation Instructions for LED Warning Lights
3TLD-02, 3TLF-02 & 3TLP-02
Publicidad
Tabla de contenido
