Charging Ni-Mh Batteries In The E5; Initial Settings - Eton E5 Guía De Funcionadmiento

F1-7 DUAL FUNCTION BUTTON DIAGRAM
The F1-7 buttons have dual functions, noted on the diagram under
the E5's rear tilt flap.

CHARGING Ni-MH BATTERIES IN THE E5

With its included AC adapter/charger connected, the E5 internally
recharges 4 Ni-MH (nickel-metal-hydride) rechargeable batteries
(not included). Note that the E5 can still play while the batteries are
charging and the alarm functions will work.
To charge batteries:
1. With the E5 turned off, install 4 NI-MH batteries and connect the
AC adapter/charger.
2. Press the F7 button for about 3 seconds, or until CHG appears in
the upper right of the display and the charging hours appear in
the display.
3. Use the tuning knob to select the charging time in hours (00-23)
based on the mAh rating of your batteries: 11 hours for 1100
mAH rating; 23 hours for 2300 mAH rating; etc.
4. Press the PAGE/TIME button when finished. In the display, the
battery symbol's segments continuously activate from left to
right during charging. Battery charging terminates once the set
charge time has been reached.

INITIAL SETTINGS

Assure that it is powered with the AC adapter or batteries; that it is
unlocked; that the DX/LOCAL switch is in the DX position.
E5 OWNER'S MANUAL
3