Daily Use; Switching The Receiver On And Off; Selection Of Digital Programmes - Salora DVB 420-T Instrucciones De Manejo

Daily use

Switching the receiver on and off

Switch the receiver on or off by pressing the stand by button on the
remote control handset or on the front panel.
When the receiver is on, the LED display shows the programme number
and in stand by the current time.
Note! Unplug the receiver from the mains and antenna wall sockets
before thunderstorm or when the receiver will not be used for a long
time.
Programme selection
By using the "TV/Radio" button you select the reception of either a TV
programme or a radio programme.
Select the programme by using the number buttons or the arrow buttons
(up/down) of the remote control.
By pressing the LAST button you can toggle between the latest two
channels.
By pressing the i button you can view information of the watched
programme. By pressing the i button a second time you can view addi-
tional information of the programme.
Note! If necessary, you can also select programmes with the CH -/+
buttons on the front paneln of the receiver.
Programme selection from the channel list
When pressing shortly the OK button of the remote control, a pro-
gramme list appears on the screen.
Select the desired channel from the list with the arrow buttons (up/down)
and accept the selection by pressing the OK button. Leave the list display
by pressing once more the OK button.
Note! Current button functions are shown on the lower part of the
screen.
Sound volume
Adjust the sound volume using the VOL d / c buttons.
Note! If necessary, you can also adjust the volume with the VOL -/+
buttons on the front paneln of the receiver.
Sound muting
When pressing the mute button once the sound is switched off. The
second pressing returns the sound back to normal.
83040161Gb
Stand by
button
Stand by
button
TV / Radio
button
Arrow
buttons
29
Mute
button
LAST
button
OK
button
i
button