Pre-Installation Checklist; Preparing The Opening; Product Dimensions And Clearances - GE JP328 El Manual Del Propietario

PRE-INSTALLATION
CHECKLIST
When preparing cooktop opening, make
A
sure the inside of the cabinet and the
cooktop do not interfere with each other.
(See section on preparing the opening.)
REMOVE PACKAGING MATERIALS: Failure to
B
remove packaging materials could result in
damage to the appliance. Remove all
packing parts from cooktop including lifting
up the cooktop to confirm all packaging is
removed.
Remove Installation Instructions from
C
literature pack and read them carefully
before you begin.
Be sure to place all literature, Owner's
Manual, Installations, etc. in a safe place for
future reference.

PREPARING THE OPENING

PRODUCT DIMENSIONS AND
CLEARANCES
This cooktop cannot be installed in countertops
that cannot accept screws, such as granite or
marble, etc. Counter space must be provided for
installation of the cooktop. To insure accuracy,
it is best to make a template when cutting the
opening in the counter. See illustration below for
all necessary dimensions.
When choosing a location consider the following
clearances:
• 30 (76.2 cm) minimum vertical clearance from
the cooktop to the nearest overhead surface.
If a 30" clearance between the cooking surface
and overhead combustible materials or metal
cabinets cannot be maintained, a minimum
clearance of 24" is required and the underside
of the cabinets above the cooktop must be
protected with not less than 1/4" insulating
millboard covered with sheet metal not less
than 0.0122" thick.
49-80759
All manuals and user guides at all-guides.com
Installation Instructions
13
(33 cm)
Max.
A
D
M
E
L Min.
J
clearance
to side wall
Cooktop and cutout dimensions
Model JP328
30 / "
1
4
A
76.8 cm
21 / "
1
4
B
54.0 cm
28 / "
3
8
C
72.1 cm
19 / "
3
8
D
49.2 cm
19 / "
1
2
E
49.5 cm
28 / "
1
2
F
72.4 cm
14 / "
1
4
G
36.2 cm
NOTE: For K and L – this cooktop has been
approved for 0" spacing to adjacent surfaces
above the cooktop. However, a 6" minimum
spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended
to reduce exposure to steam, grease splatter,
and heat.
30
(76.2 cm)
Min.
B
15
(38.1 cm)
H
C
Min.
K Min.
clearance to
side wall
F
G
Model JP328
3" min.
H
7.6 cm
1 / " min.
3
4
I
4.4 cm
3 / " min.
1
2
J
8.9 cm
Refer to Note
K
below
Refer to Note
L
below
33 / " min.
1
4
M
84.5 cm
11