Using The Device - Master & Dynamic MW01 Manual Del Usuario

USING THE DEVICE

The MW01 will automatically connect to previously connected headphones/
earphones. Select the number of prongs required to connect to the audio input of
the intended analog (wired) device. If using a one-prong connection (auxiliary), use
only the prong marked "1".
Extended
Once prongs are selected, push down to retract the MW01 and connect the prongs
to your analog device.
USER MANUAL
Dual 3.5mm inputs Single 3.5mm input
Retracted
CONNECTING A SECOND PAIR OF WIRELESS HEADPHONES
OR EARPHONES FOR SHARED LISTENING
Connect to your first pair of earphones or headphones, then activate pairing mode
again by putting the MW01 into the extended position and tucking away both prongs.
Do not power OFF. Once the MW01 is in pairing mode (indicated by a pulsing white
light), activate pairing mode on your second pair of earphones or headphones and
place them adjacent to your MW01. A solid white light indicates you are connected.
Select the required prongs and use MW01 normally. The MW01 will automatically
forget the second earphone or headphone after you power OFF.
MW01 WIRELESS BLUETOOTH ADAPTER / TRANSMITTER
EN
3