Device Elements; Cleaning Operations - Kärcher NT 20/1 Me Classic Manual De Instrucciones

Device elements

1 Fastening clip
2 Cartridge filter
3 Float
4 Suction head
5 Suction hose with manifold
6 Cable hook/jack for manifold
7 Hose/cable holder
8 Carrying handle
9 Suction head lock
10 Dirt receptacle
11 Steering roller
12 Chassis
13 Floor nozzle for wet vacuum cleaning
14 Floor nozzle for dry vacuum cleaning
15 Switch between hard surface/carpet
16 Suction support
17 Main switch
18 Suction tube
19 Holder (narrow)
20 Holder (wide)
21 Power cord
22 Nameplate
Start up
ATTENTION
For vacuuming, the cartridge filter must al-
ways be installed.
Dry vacuum cleaning
– To vacuum fine dust, you can also use
an additional paper filter bag.
– When changing from wet to dry vacuum
cleaning, the wet cartridge filter must be
dried or replaced with a dry cartridge fil-
ter first.
Inserting the paper filter bag
Illustration
 Release and remove the suction head.
 Insert the paper filter bag.
 Insert and lock the suction head.
Wet vacuum cleaning
Remove the paper filter bag
– To suck wet dirt, first remove the paper
filter bag.
16
All manuals and user guides at all-guides.com
 Plug in the mains plug.
 Switch on the appliance at the main
 Dry vacuum cleaning: Use floor nozzle
 Wet vacuum cleaning: Use floor nozzle
 Perform the cleaning operation.
– The vacuum channel is equipped with a
– When the dirt water reaches the highest
 Switch off the appliance at the main
 Release and remove the suction head.
 Empty the dirt container.
 Switch off the appliance at the main
 Pull out the mains plug.
 Empty the dirt container.
 Vacuum and wipe the appliance inside
Illustration
 Store the suction pipes, the suction
 Place the appliance in a dry room and
– 2
EN
Operation
Turning on the Appliance
switch.

Cleaning operations

for dry vacuum cleaning.
Set the selection switch of the floor noz-
zle to hard surface or carpet.
for wet vacuum cleaning.
Emptying the dirt container
float.
permissible level in the container, the
suction power is interrupted.
switch.
Turn off the appliance
switch.
After each operation
and outside with a damp cloth.
Storing the Appliance
hose and the mains cable as shown in
the illustration.
secure it from unauthorized use.