Adding Rinse Aid To The Dispenser - LG LDFN343 Serie El Manual Del Propietario

us_main.book.book Page 31 Thursday, January 21, 2021 10:27 AM
• Using liquid rinse aid improves drying
performance by allowing water to drain off of
dishes after the final rinse.
• Do not use detergent tablets for shorter wash
cycles. The tablet may not dissolve completely,
causing detergent residue on dishes and
inefficient cleaning.
• Using a wash booster helps remove spots,
residue, and the white film caused by hard
water. It does not help remove excess detergent
residue.
1
Push the button on the dispenser lid to open
the cover.
2
Add dishwashing detergent to the main wash
compartment until the level is between the
lines marked 15 and 25.
• Fill to over the 25 line for hard water or
heavily soiled loads.
• Fill to the 15 line for soft water or lightly
soiled loads.
۲٥
۱٥
3
Slide the detergent lid closed until it clicks.
4
If a prewash is desired, fill the recessed
prewash compartment area on the lid with
detergent.

Adding Rinse Aid to the Dispenser

The Rinse Aid e icon appears in the display when
more rinse aid is needed.
The use of rinse aid is recommended to prevent
water spots on dishes and to enhance drying
performance.
NOTE
• Only use liquid rinse aid in the dishwasher.
• Do not overfill the rinse aid dispenser.
• Wipe off any spilled rinse aid around the
dispenser.
1
Open the rinse aid lid by lifting up the flap.
2
Add a liquid rinse aid to the maximum fill
level. Allow the rinse aid to settle in the
dispenser while filling, or air bubbles may
result in poor drying performance. Avoid
overfilling the dispenser.
OPERATION 31