Parts And Components; Before Use; Product Installation - cecotec CONGA POPSTAR 29600 AQUA&COLLECT Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. On/off button
2. Operation light indicator
3. Speed
4. Body handle
5. Machine body cover
6. Water tank release button
7. Water tank
8. Sewage tank
9. Rolling brush cover
10. Rolling brush body
11. Charging stand
12. Charger
13. Spray push button

2. BEFORE USE

- Take the product out of the box.
- Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.

3. PRODUCT INSTALLATION

Body handle installation
Insert the end of the handle into the port of the machine body perpendicular to the direction of
the machine. After hearing a click, ensure that the handle is tight lose to ensure a successful
installation. If you want to take out the handle body, unscrew the body cover, insert it into the
hole shown in the figure with a hard tool, and then pull out the handle.
Fig. 2
Install the battery pack
Push the machine body cover up and put the battery pack into the battery pack slot. When a
"click" is heard, it indicates that it is assembled in place and that the body cover is closed.
Fig. 3
40
CONGA POPSTAR 29600 AQUA&COLLECT