Philips AVENT SCD530/00 Manual De Instrucciones página 18

EngliSh
18
Question Answer
Perhaps the non-rechargeable batteries of the baby unit are empty
and the baby unit is not connected to the mains. Replace the non-
rechargeable batteries or connect the baby unit to the mains. Then
press the on/off button to establish connection with the parent unit.
The baby unit and the parent unit may be out of range of each other.
Move the parent unit closer to the baby unit, but not closer than 1
metre/3 feet.
If the LINK light on the parent unit still does not start to flash, use the
reset function to reset the units to their default settings.
Why does the LINK light The baby unit and the parent unit are out of range of each other.
on the parent unit light Move the parent unit closer to the baby unit.
up red continuously and
why is the message
'Not Linked' shown on
the display?
The baby unit may be switched off. Switch on the baby unit.
Why does the battery The non-rechargeable batteries of the baby unit are running low.
symbol flash on the Replace the non-rechargeable batteries or connect the baby unit to
display of the baby unit? the mains (see chapter 'Preparing for use').
Why does the parent If the parent unit beeps while the LINK light lights up red continuously
unit beep? and the message 'Not Linked' is shown on the display, the connection
with the baby unit is lost. Move the parent unit closer to the baby unit.
If the parent unit beeps and the battery symbol on the display is
empty, the rechargeable battery pack of the parent unit is running low.
Recharge the rechargeable battery pack.
If you have switched off the volume while the sound alert is on, the
parent unit beeps whenever the fourth sound level light lights
up because the baby unit has picked up a sound.
If you have set the room temperature range on the parent unit and
the temperature alert is on, the parent unit beeps when the
temperature drops below the set level or below 14°C or when the
temperature rises above the set level or above 30°C.
The baby unit may be switched off. Switch on the baby unit.
Why does the appliance The units may be too close to each other. Make sure the parent unit
produce a high-pitched and the baby unit are at least 1 metre/3 feet away from each other.
noise?
The volume of the parent unit may be set too high. Decrease the
volume of the parent unit.
Why don't I hear a The volume of the parent unit may be set too low or may be
sound/Why can't I hear switched off. Increase the volume of the parent unit.
my baby cry?
All manuals and user guides at all-guides.com