Installing your television set
& Positioning the television set
5 cm
Place your TV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).The set
must not be exposed to water.
é Connections
• Insert the aerial plug into the
the rear of the set.
• Insert the mains plug into a wall socket (220-
240 V / 50 Hz).
The keys on the TV set
The television set has 4 keys which are
located on the front or the top of the set
depending on the model.
2
All manuals and user guides at all-guides.com
5 cm
5 cm
:
socket at
" Remote control
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
The batteries supplied with this appliance do not
contain mercury or nickel cadmium. If you have
access to a recycling facility, please use this facility
(if in doubt, consult your dealer).When the batteries
are replaced, use the same type.
' Switching on
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter
Switching on for the first time, on page 4.
If the television remains in standby mode,
#
press P
on the remote control.
The indicator will flash when you use the remote
control.
"
The VOLUME - + (-
adjust sound levels.
The PROGRAM - + (- P +) keys are used to
select the required programmes.
To access the menus, simultaneously hold
"
"
down the
- and
PROGRAM - + keys may then be used to
select an adjustment and the -
make that adjustment.
To exit from the menus, hold down
"
"
the 2
- and
+ keys.
+) keys are used to
+ keys.The
"
+ keys to