Cleaning & Maintenance - Sinbo SK 2383 Manual De Instrucciones

All manuals and user guides at all-guides.com
OPERATION
It is recommended that operate the kettle several times following the below instruction
and discard off the water before first use. This will remove the material or dust remained
in the appliance which is caused by the manufacturing process.
1. Open the lid by pulling the Lid upwards and fill water into the kettle. Then replace the
lid otherwise the kettle could not be cut off power automatically after water being boiled.
Alternatively the water can be filled through the spout.
Caution: the filled water level must be between the Max and Min levels as indicated on
the housing. Too less water will do damage to the heat element and if the water is
overfilled, boiling water may be ejected.
2. Replace the kettle on the Power Base and connect to power supply. Position the kettle
so that the spout of kettle is facing away from you.
3. Press down the switch to "1" position and the lamp will be illuminated. And water
begins to be heated up. Do not remove the lid while the water is boiling.
4. Power will be cut off automatically and switch will be back to "0" position once water
has been boiled. And the lamp will be off.
5. The boiling process can be terminated at any time by lifting the kettle off the Power
Base.
CAUTION:
- Never operate the appliance empty. In the event of this case occurred, the thermal cut-
off inside the kettle would operate to cut off power automatically. Unplug the appliance
and let it completely cool down.
- Never touch the stainless housing during operation as scalding may occur.
CLEANING & MAINTENANCE
1. Remove the plug from wall outlet and let the appliance completely cool down before
cleaning.
2. Do not immerse power cord, kettle and Power Base in water.
3. In order to maintain the polish of the stainless steel surface, never use abrasive cleaner
to wipe the housing.
4. Periodical descaling is needed. The interval of descaling depends on the hardness of
water in your living area and the frequency your using the kettle.
5. The Filter can be detached for easier cleaning simply by pulling it out. To attach, insert
the Filter into the support dent.
6. Do not attempt to dismantle the kettle or power base. No user serviceable parts inside
it. For any problem, contact the authorized service facility for help.
- 7 -