Changing The Battery - Brinkmann Home Security SL-8 Manual Del Propietário

All manuals and user guides at all-guides.com
INSTR-821-7100-0_SL7_Span.qxd

Changing the Battery

Step 1
Unplug the solar panel cord from light and
remove the light from the mounting bracket.
Turn the switch to the "OFF" position.
Step 2
With the light on its side, unscrew the four
screws in rear housing and carefully separate it
from front housing.
Step 3
Remove the battery from rear housing, being
careful not to pull on wires.
Step 4
Disconnect wires from battery terminals and
remove battery.
Step 5
Connect wires to new battery terminals. Make
sure red (+) wire is connected to red (+)
terminal and black (-) wire is connected to
black (-) terminal.
Step 6
Place new battery in rear housing.
Step 7
Attach the front housing to rear housing using
the four screws that were removed in Step 1.
Step 8
Place light back on mounting bracket and
firmly plug the solar panel cord into the main
housing. Then twist the plug counter-clockwise
to lock into position.
Step 9
Charge in FULL, DIRECT SUNLIGHT for
THREE FULL DAYS. Then turn the switch to
the "AUTO" position. The light will turn on
automatically at night when it detects motion.
7
6/25/07 2:56 PM Page 8
Contains lead-acid (Pb)
battery. Battery must be
recycled or disposed of
Front Housing
Wire Connector
properly.
Rear Housing
Battery
Terminal