Setup Instructions - Digital Signature MINT 300 Guia Del Usuario

S E T U P I N S T R U C T I O N S
Setting up your Mint Digital Music Station is quick and easy with
the simple instructions below. You'll be listening to your music in just a
few minutes.
MINT SPEAKERS
Set Up Each Mint Speaker
1. Install optional speaker feet (4) on the bottom of each
speaker. This helps protect your furniture from scratches.
2. Plug red speaker cable connector into the red
speaker post.
3. Plug black speaker cable connector into the black
speaker post.
Speaker Grilles
Speaker grilles snap on and off. You can use speakers with grilles off if you prefer. To best protect
your speakers, leave grilles on.
Speaker Position
Proper positioning of the speakers will enhance the sound quality of your Mint Digital Music Station.
1. Place a speaker to the left and right of the amplifier. Make sure speakers are unobstructed.
2. Determine the area of the room where you want to get optimum quality sound. That's your
target space. Position each speaker the same distance from your target.
MINT AMPLIFIER
Set Up the Mint Amplifier
1. Plug speaker cable connectors from the right
speaker into right-side post on the back of the
Mint amplifier.
2. Connect red to red and black to black.
3. Connect the left speaker in the same way.
4. Plug the power cord into the Mint amplifier
and then into a wall outlet.
06 ENGLISH