Digital Signature MINT 300 Guia Del Usuario página 8

S E T U P I N S T R U C T I O N S
Mint Amplifier Control Panel
POWER MUTE
Power Button
1. Press power to turn the system on. The button will glow mint green and one of the source-
selection buttons will also glow green indicating that this music source is ready to play.
2. To turn power off, press mint green power button. The light will stop glowing and the Mint
system will turn off.
Volume Buttons
There are three buttons to control volume to the speakers: – (volume down) and + (volume up),
and mute. Volume and mute can be controlled by:
- Mint amplifier
- Mint remote control
Source-Selection Buttons
- iPod – Plays your iPod while docked in the Mint amplifier.
- USB – Plays music from your computer.
- Wireless Audio – Plays songs from your PC or Mac through the Wireless USB audio transmitter.
- Line In – Plays devices connected through stereo headset jacks or RCA-type connectors.
(Cables not included.)
To choose a music source:
1. Make sure the power button of the Mint Amplifier is glowing mint green.
2. Select the source you want to play. When it is selected, it will glow green.
3. Be sure the music source is turned on and music is selected.
Mint Remote Control
The mini remote control has all of the same buttons that are
found on the Mint amplifier and they operate in the same
way. You can turn the volume up or down, mute your music,
select a source and iPod song control(play, pause and skip).
Before using the remote, remove the plastic safety tab.
Replace the battery when the remote stops operating normally
or its range seems reduced. For battery replacement and proper
disposal instructions, please see the Tips and Quick Fixes section
of this guide.
Any unauthorized changes or modifications to the equipment not expressed in this User
Warning:
Guide may void the product warranty.
Wireless
iPod USB LINE IN
Audio
VOLUME
ENGLISH 07