Working Conditions - PYD Electrobombas SH Serie Manual De Instalación Y Mantenimiento

INSTRUCTIONS MANUAL AND MAINTENANCE
SERIE SH
APPLICATION
Mainly applicable for conveying of industrial liquid, such as mineral water soft water pure
water clean oil and circulation and boosting for other weak chemical-industrial medium:
• Cold water chiller cooling cycle
• Water treatment processes
• Industrial cleaner and dishwasher
• Water boosting on process
• Heating and cooling for industrial process
• Air-conditioning system
• Air freshening heater device(soft water)
• Water supply and boosting (drinking water light chlorine water)
• Fertilization/metering system

WORKING CONDITIONS

• Liquid temperature: -15ºC ~ +70ºC
• Llow temperature: -20ºC ~ +70ºC
• Standard model:+15ºC ~+70ºC
• High temperature:+70ºC ~+104ºC
• Max.environmental temperature: 50ºC
• Max. operating pressure: 8 bar
• Max. suction pressure is limited by max. Operating pressure
MOTOR
• 2-pole induction motor.
• three-phase: 230/400V/50 Hz, 220/380V/50 Hz
• Single-phase: 220~240V/50Hz
• Single-phase with input thermal protector
• Insulation class: F
• Protection: IP55
• Continuous duty
CONNOTATION OF THE TYPE
SH
2 30 (T)
www.proindecsa.com / proindecsa@proindecsa.com
Single Phase without
mark Three Phase: T
Number of stages
Nominal flow m /h
3
Horizontal multistage
section type centrifugal pump
5