Mixcder TR007 Manual Del Usuario página 6

All manuals and user guides at all-guides.com
Attention:
1. After the pairing process succeeds the first time, when the
device is turned on the next time, the device will automatically
connect to the device that was paired last.
2. If you need to use the receiver mode, turn off your transceiver
first and turn the toggle switch to the "RX" position.
3. If the devices are apart beyond the working distance, the
pairing function between the devices will be terminated. When
the paired devices are back within the valid distance, the pairing
function will be automatically restored.
4. When the battery level of the transceiver is low, the alarm is
heard. When the voltage is less than 3.0V, the transceiver will
automatically turn off.
Q&A
Q1: Why TR007 can not be turned on?
A1.1: The battery of TR007 may have no power. Please
connect the battery to a charger using the charging cable.
Q2: Why the Bluetooth devices can not be paired?
A2.1: Check if the Bluetooth function in the device has been
activated. If not, activate the Bluetooth function and search
available Bluetooth device for pairing.
A2.2: TR007 possibly has been paired with other devices.
Terminate the pairing function of the last device before start
the pairing process of a new device.
A2.3: TR007 may not be recognized by the device. Turn off
TR007 first and turn it on again. Activate the search function in
the device that supports the Bluetooth function. Perform the
pairing process again.
A2.4: TR007 may be located beyond the valid distance of the
Bluetooth device. Make sure the distance between TR007
and your device to be within 1 meter without any obstacle in
between.
Q3: In the receiver mode, why the playback device has no
sound?
EN-5