First Installation In The Bath - Bellavita drive Instrucciones De Uso

◗

First installation in the bath

1. Attach the suction cups to the underside of the
seat unit (baseplate). The tongues of the rear
suction caps must be directed outwards – this
ensures better access when the lift has to be
removed from the bath. Press the tongues of
the front suction cups into the provided re-
cesses (front) in the baseplate.
Installation and use
➤
Important note:
The suction cups hold the bathlift firmly in place
on the bottom of the bath. Therefore, the suc-
tion cups at the underside of the Bellavita must
be clean and dry. The bath itself must also be
clean and dry. We recommend cleaning the suc-
tion cups and bathtub regularly with commercial
cleaning agents, so as to achieve highest possi-
ble suction.
2. Make sure that the bottom of the bath is empty
and clean (remove anti-slip mats or similar, if
necessary).
3. Place the seat unit with the suction cups atta-
ched to the baseplate into the empty bath.
Make sure that the rear suction cups are loca-
ted close to the bevelled edge of the bath.
For more slip resistance
are 2 additional suction
cups available.
English · 7