Power smart DB5004 Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
7. Locate the slot on the telescopic pole (J) and align it
with the track at the opening (K) of the main cover (M).
Insert the pole into the opening (K), making sure that
the tab inside the opening is inserted into the hole on
the pole.
8. Insert the bolt (AA) into the right groove (L) of the main
cover (M) and tighten it with a screwdriver (CC).
NOTE: Determine the left and right sides of the snow
thrower by standing in the normal operating position.
Hardware Used
AA
M6 x 32 Bolt
CC
Phillips Screwdriver
9. Insert the nut (BB) and bolt (AA) into the hole near the
opening (K) and tighten the bolt (AA) with a screwdriver
(CC).
Hardware Used
AA
M6 x 32 Bolt
BB
M6 Nut
CC
Phillips Screwdriver
All manuals and user guides at all-guides.com
x 1
x 1
x 1
x 1
x 1
10
7
M
8
M
9
CC
K
J
CC
AA
AA
K
BB