Control Panel; Assembling Instructions - Mellerware Wizzy! Track Manual De Instrucciones

You must hold on to the handrails
–
until you become comfortable and
familiar with the treadmill at your
first start the workout.
Treadmill is indoor-using equipment,
–
not outdoor-using for avoiding
damage. Keep the store-place
clean and flat, drying.
– If the treadmill should suddenly
increase in speed due to an
electronics failure or the speed
being inadvertently increased, the
treadmill will come to a sudden
stop when the pull pin is
disengaged from the console.
– All data displayed are approximate
guidance and cannot be used in
any medical application.
Description
A - Control panel
B - Safety key
C - Start/stop button
D - Speed (+/-) button
E - Pulsation sensor
G - Wheels
H - Running belt
I - Inclination adjustable

Control panel

J - Speed (8km/h)
K - Distance indicator
L - Time indicator
M - Speed indicator
N - Calories/Pulsations indicator
O - Speed (+)
P - Speed (4km/h)
Q - Programs button
R - Start button
S - Stop button
T - Mode button
U - Speed (-)
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.

ASSEMBLING INSTRUCTIONS:

Fig.1
Open the carton, take out all the
–
spare parts, and place the main
frame on the level ground.
Support the monitor frame and the
–
tubes. Fix the monitor with the
screws (5) and the lock washers (7).
Fig.2
Raise the tubes.
–
Secure the tubes to the base with
–
the screws (8) and the lock washer
(7) provided.
Secure the tubes to the base with
–
the screws (5) and the lock washer
(7) provided.
Fig.3
Fix the base covers (6) to the base
–
with the screws (3) provided.
Fig.4
Place the tablet support (4) to the
–
front part of the monitor.
Place the safety key (11) to the monitor.
–
EN