Flash Button (R) - Daewoo DTD-1100 Manual De Usuario

All manuals and user guides at all-guides.com
To change the mode of dialling:
1. Press key. Use
press key.
2. Use or keys to scroll to 'DIAL MODE' and press
key.
3. Use or keys to select 'TONE' or 'PULSE' and press
key.
OR
Press and hold the key to toggle between dialling modes: 'P'
will appear when set to pulse or 'T' when set to tone (DTMF) dialling.
After 5 sec. the unit returns to standby.

12.2 Flash button (R)

When you press key during conversation, also called flash or
recall, the unit generates a line interruption (of 100 ms or 300 ms). It
gives you the possibility to use the special services of your telephone
provider and / or to transfer calls when you have a telephone
exchange.
12.3 Changing the PIN code (system PIN code)
Certain functions are only available if you know the PIN code of the base.
The PIN code has 4 digits. The default PIN code setting is '0000'. If you
would like to change the PIN code and set your own secret code, do the
following:
1. Press key. Use
press key.
2. Use or keys to scroll to 'SYSTEM PIN' and press
or keys to scroll to 'BASE' and
or keys to scroll to 'BASE' and
19
.