Publicidad
Idiomas disponibles
Idiomas disponibles
TV TYPE
According to the Color System of the TV, you can choose the TV System.
NTSC: Choose this settings if your VIDEO player is connected to a NTSC TV.
PAL: Choose this settings if your VIDEO player is connected to a PAL TV.
AUTO: Choose this settings if your VIDEO player is connected to a multi-system TV.
The default setting is NTSC.
ANGLE MARK
If the disc has camera angle function, the screen will show the angle mark.
ON: Choose this setting to activate the angle mark.
OFF: Choose this setting to cancel the angle mark.
The default setting is OFF
SCREEN SAVER
If the screen saver is on, when your
is a frame frozen for a while, the screen saver will be displayed. This feature can protect the
screen from damage.
ON: Choose this setting to activate the screen saver.
OFF: Choose this setting to cancel the screen saver.
THE default setting is ON.
LAST MEMORY
It can record the last playback moment when you stop your
same VIDEO player next time, you can continue to play the last playback moment by pressing
the button directly. Press"STOP"button during playback. Then press "PLAY" button.
ON: Choose this setting to activate the Last memory function.
OFF: Choose this setting to cancel the Last memory function.
The default setting is OFF.
C) AUDIO
DIGITAL OUTPUT
There are a few types of output format for digital output:
OFF: Choose this setting to switc off the function.
BTS: Choose this setting to choose BTS format.
LPCM: Choose this setting to choose LPCM format.
The default setting is OFF.
DOWNMIX
LT/RT: Choose this setting, it will be sound like in a movie theatre if the original movie the
disc was recorded from was encoded in the Pro Logic Digital format.
STEREO: Choose this setting for 2-channel sound playing stereo signal output.
The default setting is STEREO.
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode. There are four modes in this option:
STEREO, L-MONO, R-MONO, and MIX-MONO. It is mainly used in karaoke mode.
The default setting is MIX-MONO.
DYNAMIC: When"LINE OUT"is selected, choose this setting to adjust the line out ratio and
get different effect. If adjusting to FULL, the audio signal peak value will be the minimun; while
adjusting to OFF, maximum.
Notes: This option will be validated when the DOWNMIX OFF.
The default setting is OFF.
LPCM OUTPUT (Optional)
Choose this option to set the LPCM output:48kHz or 96kHz.
The default setting is 48kHz.
P-9
VIDEO player
is in Stop, Open, of No Disc state,or there
VIDEO playback. When playing the
Publicidad
