Craftmade Accolade TH012 Guia De Inicio Rapido página 3

TH012 Thermometer/Clock Assembly
PARTS:
Foot tab Key Center Pole
4 Pcs. 2 Pcs.
1 Pcs.
Wood
Screw
Hole Covers
3 Pcs
Stake 4 Pcs. 3 Pcs
ASSEMBLY:
1) Base can be installed with adjustable screw-in foot tabs to stand on hard surfaces, stakes
for insertion into grass/soil surfaces, lag bolts for cement surfaces or wood screws for deck
installation. Thread foot tabs or stakes into the four holes under base. If foot tabs are used,
adjust height as necessary leveling fixture for uneven surfaces. If stakes are used, find level,
firm grass/soil area for inserting stakes. If lag screws are used, insert lag screw and secure
top portion onto base using lock washer, washer and hex nut. If wood screws are used, screw
firmly onto level wood surface. Plug hole where screws were inserted with Hole Cover.
2) Attach decorative bottom onto
base followed by the center
pole.
3) Attach clock/temperature display
head to center pole by inserting
the center pole into the fixtures
bottom cup. Using allen wrench,
turn embedded set screws
at bottom of head clockwise
until it catches pole and head is
secure.
E3
All manuals and user guides at all-guides.com
-10
Double Sided Head 1 Pcs.
Base 1 Pcs.
Hex Nut
3 Pcs
Washer
3 Pcs
Lock Washer
3 Pcs
Decorative
Lag Bolt
Bottom
3 Pcs
Allen Wrench 1 Pcs.
1 Pc
Step 1
Base
Foot tab
Step 2
60
40 80
10 20
20
30 100
0
-10 TEMPERATURE 40
0
-20 120
50
C
F
40 50
30
60
30
20
70
10 80
90
%
0 HUMIDITY BARO
Cement Installation
Replacing Batteries: Installed On Side of Housing
Look for curled tab on side of housing. Pull and slide
tab downward to access battery casing. Insert batteries
Stake
matching the "-" and "+" markings, as indicated on the
inside of the battery housing, to the markings located
on the battery. Replace battery cover by sliding cover
into place.
E4
Center pole
Wood Deck Installation
Step 3
3/8" Allen Wrench
Step 1
Step 2